![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/1/22/122e6f04-7165-48d1-955d-04c3fdf594e4/122e6f04-7165-48d1-955d-04c3fdf594e4-bg8.png)
8
SYMPTÔME
Fuite d’air près du sommet
de l’outil / fonctionnement lent.
SOLUTION
Serrezlesvisàfond/vériez
l’alimentation en air ou remplacez
les pièces portant la lettre “A”.
SYMPTÔME
Fuite d’air près de la base
de l’outil / retour inadéquat.
SOLUTION
Serrez les vis à fond / nettoyez
l’outil ou remplacez les pièces
portant la lettre “A”
SYMPTÔME
Autres problèmes.
SOLUTION
Prenez contact avec SENCO.
SYMPTOM
Air leak near top of tool /
Sluggish operation
SOLUTION
Verify air supply / tighten screws or
installPartsKitYK0780.
SYMPTOM
Air leak near bottom of tool /
Poor return.
SOLUTION
Clean tool / tighten screws or
installPartsKitYK0780.
SYMPTOM
SOLUTION
Contact SENCO.
Other problems.
SÍNTOMA
El aire se escapa cerca de la parte su-
periordelaherramienta/Operación
lenta.
SOLUCIÓN
Aprietelostornillos/Veriqueel
suministro de aire o instale el
JuegodePartesA(PartsKit
YK0780).
SÍNTOMA
SOLUCIÓN
El aire se fuga cerca de la parte
inferior de la herramienta / Mal
retorno.
Apriete los tornillos / Limpié la
herramientaoinstaleelJuegode
PartesA(PartsKitYK0780).
SÍNTOMA
SOLUCIÓN
Otros problemas.
Póngaseencontactocon
SENCO.
English
Español
Français
Troubleshooting
Identicación de Fallas
Dépannage
WARNING
Repairs other than those
described here should be per-
formedonlybytrained,qualied
personnel. Contact SENCO for
information at
1-800-543-4596.
ALERTA
Las reparaciones, fuera de aquellas
descritas aquí, deben de ser lleva-
das a cabo solamente por personal
entrenadoycalicado.Póngase
en contacto con SENCO para
información
1-800-543-4596.
AVERTISSEMENT
Les réparations autres que celles
décrites ici doivent être réalisées
uniquement par du personnel
qualiéayantreçulaformation
appropriée. Pour toute information,
prenez contact avec SENCO par
téléphone en appelant Le Distribu-
teur agréé.
l Read and understand “SAFETY
INSTRUCTIONS” manual
shipped with this tool before
using tool.
l Antes de usar la herramienta lea
y comprenda el manual “INS-
TRUCCIONES DE SEGURI-
DAD” despachado con ella.
l Lisez et assimilez le manuel
“INSTRUCTIONS DE SÉCU-
RITÉ” livré avec cet outil avant
de l’utiliser.
A=Kit#YK0780