A SERVICE OF

logo

Open as PDF
next previous
Using the Printer 2-3
Slip Paper Handling
Notes:
Use only slip paper that matches the printer’s specifications. See
Paper Specifications in Chapter 4.
Be sure that the slip is flat, without curls, folds, and wrinkles.
1. Send appropriate control commands from the computer.
2. When the SLIP light blinks, insert the slip paper into the slip
paper inlet using the right edge of the slip paper inlet as a
guide. (Follow steps ➀ and ➁ in the illustration.)
Note:
There is a label on the document table to assist you how to insert slip
paper.
3. Make sure you insert the slip paper into the inlet as far as it will
go.
4. When the slip sheet is detected by the sensor, the SLIP light is
changed from blinking to on and the paper is automatically
drawn into the printer and printing begins.
2
1
POWER
ERROR
R
ELEASE
SLIP
F
O
R
W
A
R
D
FORWARD
R
E
V
E
R
S
E
REVERSE
R
E
L
E
A
S
E
RELEASE
EPSON