
●
PoÏadavky na systém
■
CPU: rychlej‰í, kompatibilní s Intel
®
Pentium III™ 450 MHz nebo
vy‰‰í
■
Operaãní systém: Windows
®
98SE, ME, XP, Mac OS (9.1~10.2)
■
PamûÈ RAM: více neÏ 64 MB
■
Pfiídavná nebo vestavûná karta s rozhraním IEEE 1394
Záznam s propojovacím DV kabelem (pouze modely VP-D26i)
1. Videokameru pfiepnûte do reÏimu
PLAYER.
2. Spojte pomocí DV kabelu (není
souãástí dodávky) port DV IN/OUT
videokamery a port DV IN/OUT
jiného DV zafiízení.
■
Ovûfite si, zda je na LCD monitoru
zobrazen nápis “DV IN”.
3. Stiskem tlaãítka START/STOP
pfiepnûte kameru do reÏimu REC
PAUSE.
■
Na LCD monitoru je zobrazen nápis “PAUSE”.
4. SpusÈte pfiehrávání na pfiipojeném DV zafiízení a sledujte obraz na
videokamefie.
5. Stiskem tlaãítka START/STOP spusÈte záznam.
■
Chcete-li záznam doãasnû pfieru‰it, stisknûte znovu tlaãítko
START/STOP.
6. Záznam ukonãíte stiskem tlaãítka (STOP).
Reference
■
Pfii pouÏití videokamery jako videomagnetofonu se zobrazení na
LCD monitoru mÛÏe jevit jako nevyrovnané, nicménû
zaznamenávan˘ obraz nebude niãím ovlivnûn.
■
Provoz není zaruãen pro v‰echny v˘‰e uvedené poãítaãové
prostfiedí.
IEEE 1394 Data Transfer Pfienos dat pfies rozhraní IEEE 1394
ENGLISH CZECH
7979
●
System requirements
■
CPU: faster Intel
®
Pentium III™ 450Mhz compatible.
■
Operating system: Windows
®
98SE, ME, XP, Mac OS (9.1~10.2)
■
Main memory: more than 64 MB RAM
■
IEEE1394 add-on card or built in IEEE1394 card
Recording with a DV connection cable (VP-D26i only)
1. Set the power switch to PLAYER
mode.
2. Connect the DV cable (not supplied)
from the DV IN/OUT port of the
camcorder to the DV IN/OUT port of
the other DV device.
■
Make sure that DV IN appears
on the screen.
3. Press the START/STOP button to
begin REC PAUSE mode.
■
PAUSE is displayed on the OSD.
4. Start playback on the other DV device while you monitor the
picture.
5. Press the START/STOP button to start recording.
■
If you want to pause recording momentarily, press the
START/STOP button again.
6. To stop recording, press the (STOP) button.
Reference
■
When using this camcorder as a recorder, the pictures that
appear on a monitor may seem uneven, however recorded
pictures will not be affected.
■
Operations are not guaranteed for all of the recommended
computer environments mentioned above.
00659H VP-D26 UK+CZE (60~105) 5/23/03 2:35 PM Page 79