23 Getting Started
To use Three-Touch Dialing for Speed Dial locations 100-300:
1. Press the first digit.
2. Press the second digit.
3. Press and hold the third digit for approximately two
seconds. (The display confirms that the number has been
dialed when it shows “Calling...”.)
Note: Your phone also supports 1- 4 digit dialing. If you enter a number
using the keypad without holding the last number and then press ,
your phone will dial those digits. (For example, if you enter
and press , it dials 211, not the number stored in memory
location 211.
Entering Text
Selecting a Character Input Mode
Your phone provides convenient ways to enter words, letters,
punctuation, symbols, and numbers whenever you are prompted to
enter text (for example, when adding a Phone Book entry or when
sending text messages).
To change the character input mode:
1. When you display a screen where you can enter text,
press .
2. Select a character input mode:
• T9 (English) to enter characters using predictive
T9 Text Input (see page 24).
• Alpha to enter characters by tapping the keypad
(see page 24).
• Symbol to enter symbols (see page 25).
