ENGLISH
117
117
✤
✓
✓
✓
✤
✤
✤
✤
✓
✓
✓ 50°C 0°C
✓
✓
✤
✓
✓
✓
✓
✓
✤
✓
✓
✓
✓
✓
“Memory Stick Formatter”
Maintenance :
Cleaning and Maintaining the CAM
After using the CAM
✤ For the safekeeping of the CAM, follow these steps.
✓ Turn the CAM off.
✓ Remove the Battery Pack (refer to page 19).
✓ Remove the Memory Stick (refer to page 33).
✤ To prevent any damage to the LCD monitor,do not apply excessive
force on its moving parts.
✤ Do not drop or in anyway shock the CAM.
✤ For prolonged use of the CAM, avoid using it in places subject to
excessive humidity or dust.
✤ Do not leave the CAM in places subject to:
✓ Excessive humidity, steam, soot or dust.
✓ Excessive shock or vibration.
✓ Extremely high (over 50°C or 122°F) or extremely low (under 0°C or 32°F)
temperatures.
✓ Strong electromagnetic fields.
✓ Direct sunlight or in a closed car on a hot day.
✤ For the safe use of the battery pack, follow these.
✓ To conserve battery power, be sure to turn off the CAM power when not in
use.
✓ Battery consumption may vary depending on the condition of use.
Recording with many starts and stops, frequent zooming, and recording in
low temperatures will shorten actual recording times.
✓ Dispose of used battery packs promptly.Do not dispose of them in fire.
✓ The battery pack will become warm during charging and use.This is not a
malfunction.
✓ The battery pack has a limited service life.If the period of use becomes
noticeably shorter with a normal charge, the battery pack is at the end of
its service life.Replace it with a new battery pack.
✤ For the safe use of the Memory Stick and the Memory Stick Pro,follow
these.
✓ The Memory Stick should be stored away from heaters and other heat
sources.Avoid storing Memory Sticks under direct sunlight and avoid
electromagnetic fields.
✓ Do not power off any devices while transferring data, as this may destroy
the data.
✓ Back up your image data often to a hard disk or other permanent storage
media.
✓ Format the Memory Stick periodically.
✓ When formatting the Memory Stick or Memory Stick Pro, format in the
CAM.If you format it on PC, use the ‘Memory Stick Formatter’in the
supplied software CD.
