• To use MagicInfo with an MXN-3, MPN-3 model, connect the MagicInfo output on the already
included network box to [HDMI IN 2 (MAGICINFO)] on the product.
• To use MagicInfo with an MX-3, MP-3 model, install inside the product a network box specified
by Samsung and connect the MagicInfo output on the network box to[HDMI IN 2 (MAG-
ICINFO)] on the product.
Multi Control
Assigns an individual ID to the SET.
• ID Setup
Assigns distinctive IDs to the SET.
• ID Input
Use to select the transmitter functions of the individual SET. Only a SET where the ID
corresponds to the transmitter setting becomes activated.
• MDC Connection
Selects a port to receive the MDC inputs from.
• RS232C MDC - Communicates with the MDC via a RS232C MDC cable.
• RJ45 MDC - Communicates with the MDC via an RJ45 MDC cable.
• Network Setting
• IP Setting : Manual, Auto
• IP Address : Manually enter the IP Address if IP Setting is set to Manual.
• Subnet Mask : Manually enter the Subnet Mask if IP Setting is set to Manual.
• Gateway : Manually enter the Gateway if IP Setting is set to Manual.
MagicInfo
Available Modes
•
PC / DVI / DisplayPort
•
AV
•
Component
•
HDMI
Adjusting the LCD Display
