4-38
Filling the white ink
Turn on the power supply of the printer and fill white ink.
1
Turn ON the power of the printer.
• Referring to P.2-3 “Turning the Power ON”, turn on the power
supply.
2
Select [FILL UP INK] of the maintenance menu.
(1) Press the key in the Local.
(2) Select [MAINTENANCE] by pressing the keys then press the key.
(3) Select [FILL UP INK] by pressing the keys.
3
Press the key.
4
Press to select damper [ _ _ _ _ YKWW].
5
Press the key.
• The screen to check air purge valve OPEN is displayed.
6
Open the right maintenance cover.
7
Open the air purge valve.
• Using a flat-blade screwdriver, rotate the air purge valve so
that the slot of it may be horizontal.
8
Close the right maintenance cover.
• When replacing the white ink filter, be sure to wear the attached goggles and the gloves. Ink
may get in your eyes.
• Organic solvent is used for ink.
If it adheres to your skin or gets in your eyes, immediately wash off with water enough.
AIR PG VALVE OPEN
COMPLETED [ ENT ]
Air purge valve
Make the slot
horizontal.
