Faxing
26
2
Reference
p.15 “Placing Originals”.
C
CC
C
Select the scan settings you re-
quire.
Reference
p.29 “Scan Settings”
p.30 “Original Type”
p.31 “Image Density (Con-
trast)”
D
DD
D
Specify a destination.
Note
❒ If you make a mistake, press the
{
{{
{Clear/Stop}
}}
} key, and then enter
the correct number.
Reference
p.33 “Specifying a Destination”
p.35 “Using the Destination
List”
p.25 “Chain Dial”, Facsimile Ref-
erence <Advanced Features>
p.26 “Redial”, Facsimile Refer-
ence <Advanced Features>
E
EE
E
Press the {
{{
{Start}
}}
} key.
The machine calls the destination.
While it is dialing, the number or
name which is programmed as the
Own Name or Own Fax Number
in the machine of the other party is
shown on the display. When con-
nected, the machine starts scan-
ning the original.
Note
❒ Do not lift the ADF or ARDF
during scanning.
After transmission, the standby
display appears.
AAN107F
On Hook Dial
Pause/
Redial
ABC DEF
MNOJKLGHI
WXYTUV
OPER
PRS
Clear/Stop
Start
Enter
Kir-C2-ENcombine_F_FM.book Page 26 Wednesday, April 27, 2005 5:42 PM
