2. Point to the choice that matches the way you have your DVD player
connected to the TV.
3. Press MENU or OK to continue.
SETTING TH E SAT/CABLE CHANNEL
(AUTO TU N ING)
The next step lets you set the SAT/CABLE channel. When you set the SAT/
CABLE channel, you're telling the TV what channel to tune to when you
press the SAToCABLE button on the remote.
Indicate which input you used to connect a satellite receiver or a cable
box. If you don't have a satellite receiver or cable box connected to the
TV, skip this step or select Not Connected from the SAT/CABLE Channel
choice list. (For more, see Auto Tuning in the Using the Menu System
section.)
1. Press MENU or OK to bring up the SAT/CABLE choice list.
2,
3.
Point to the choice that matches the way you have your satellite
receiver or cable box connected to the TV.
Press MENU or OK to continue.
If You Have Both a Satellite
Receiver and a Cable Box
Connected to the TV
The remote cannot control both a cable
box and the satellite receiver, if you
choose to have the remote control the
satellite receiver, you must then use your
cable box remote to control the cable box.
You may, however, prefer to use the
satellite receiver remote for satellite
programming, and set your SAToCABLE
button to control your cable box. It's your
choice.
19
