C
HAPTER FOUR: VCR OPERATION
65
Using Block Repeat
Block repeat allows you to repeat a section of tape that you select. You can
repeat this section of tape (the “block”) from one to ten times, or endlessly.
▼
You can choose to have your
“block” repeat from one to ten times,
or endlessly.
3
Insert and play a
pre-recorded video
cassette tape.
▼
4
Press the REPEAT button
at the beginning of the
“block” you want to
repeat.
“Repeat” section should be set up
at a minimum five-second interval.
▼
5
When you reach the end of the “block,” press the REPEAT
button again.
The word “Repeat” will appear on
the screen.
To stop block repeat, press the STOP, or
POWER button. You can also cancel
block repeat by fast forwarding or
rewinding to a point outside the
“block.”
The VCR will rewind the tape to beginning of the block and
repeat it.
The VCR will repeat the block as many times as the number
you set in step 2.
VCR OPERATION
2
Press the DOWN arrow
button to select “Block
Repeat”, then press the
RIGHT arrow button to
select the number of times
you want your “block” to
repeat.
Press the MENU button to
return to normal viewing.
1
Press the MENU button.
Press the DOWN arrow
button to select the VCR
Setup icon, then press the
RIGHT arrow button.
