28 Chapter 4
Graphics contained within this publication are for representation only.
Chapter 4: Using the TV’s Menu System
Audio Menu
Mute Press OK to reduce the TV’s volume to its minimum
level. Press OK again to restore the volume.
Tone Controls Displays the slider controls for adjusting the
TV’s treble, bass and balance.
Audio Processor Displays a choice list of available audio
modes, which control the way the sound comes through your
speakers.
Mono Plays the sound in mono only. Use this setting
when receiving broadcasts with weak stereo signals.
Stereo Splits the incoming stereo audio signal into left
and right channels. Most TV programs and recorded
materials have stereo audio. The word STEREO appears on
the TV when you tune to a program that is broadcast in
stereo.
Expanded Stereo Electronically “widens” sound from
stereo broadcasts, stereo VCRs, digital satellite systems,
DVD players, and laserdisc players for a fuller, more
spacious sound.
Sound Logic
™
Stereo Reduces the annoying blasts in
volume during commercial breaks, and also amplifies
softer sounds in program material. Eliminates the need to
constantly adjust volume control.
Second Audio Program (SAP) Plays the program’s audio
in a second language, if one is available. The word SAP
appears on the TV when you tune to a program that is
broadcast with SAP information. SAP audio is broadcast
in mono. SAP is also used to broadcast a program’s audio
with descriptions of the video for the visually impaired.
Audio Output & Speakers Displays a choice list that lets
you turn the TV’s internal speakers on or off, and set the
audio outputs to fixed-level or variable control level.
Variable Output, Speakers On This setting turns the TV’s
speakers on and allows variable output from the TV’s
audio output jacks.
Variable Output, Speakers Off This setting turns the TV’s
speakers off and allows variable output from the TV’s
audio output jacks to an external component such as a
surround sound amplifier.
Fixed Output, Speakers Off This setting turns the TV’s
speakers off and allows fixed output from the TV’s audio
output jacks to an external component such as a
surround sound amplifier. When you choose Fixed Output
Off, the TV’s volume control, tone controls, and mute are
disabled.
MAIN MENU
1 Audio
2 Picture Quality
3 Screen
4 Channel
5 Time
6 Parental Controls
7 GUIDE Plus+ Menu
8 Setup
0 Exit
AUDIO
1 Mute
2 Tone Controls
3 Audio Processor
4 Audio Output & Speakers
0 Exit
