6
5. Attach the Seat (7) to the Seat Brackets (5, 6)
with eight M6 x 25mm Screws (15) and eight M6
Washers (19).
6. Make sure that that all parts are properly tight-
ened before you use the weight bench. The
use of all remaining parts will be explained in
ADJUSTMENTS, beginning on the following
page.
5
7
6
19
19
15
15
3. Press two 64mm Round Outer Caps (8) onto the
Left Stabilizer (2).
Attach the Left Stabilizer (2) to the Bench Frame
(1) with two M10 x 15mm Button Bolts (14) and
two M10 Washers (20).
4. Lubricate the hinges on the Left Seat Bracket (5)
and the Right Seat Bracket (6) with grease.
Orient the Weight Tray (4) with the slots on the
side shown. Attach the Weight Tray to the Bench
Frame (1) with four M10 x 28mm Button Bolts
(16), the two Seat Brackets (5, 6), and four M10
Nylon Locknuts (18). Note: The Seat Brackets
have stickers on them for part identification.
3
2
8
8
20
14
1
4
5
18
18
18
4
5
16
Slot
Lubricate
Lubricate
Slot
6
18
1
16
19
19
15
