Turning the unit on
% Press SOURCE to turn the unit on.
When you select a source the unit is turned
on.
Selecting a source
You can select a source you want to listen to.
Toswitch to the built-in CD player, load a disc
in the unit (refer to page 17).
% Press SOURCE to select a source.
Press SOURCE repeatedly to switch between
the following sources:
TunerTelevisionDVD player/Multi-
DVD playerBuilt-in CD playerMulti-
CD playerExternal unit 1External unit
2AUX
% When using the remote control, press
TUNER or CD to select a source.
Press each button repeatedly to switch be-
tween the following sources:
TUNER: TunerTelevisionSources off
CD: DVD player/Multi-DVD playerBuilt-
in CD playerMulti-CD playerSources
off
Notes
! In the followingcases, the sound source will
not change:
When there is nounit corresponding to the
selected source connectedto this unit.
When there is nodisc in the unit.
When there is nodisc in the DVD player.
When there is nomagazine in the multi-
CD player.
When there is nomagazine in the multi-
DVD player.
When the AUX (auxiliary input)is set to off
(refer to page53).
! External unit refersto a Pioneerproduct (such
as one available in the future) that,although
incompatible as asource, enables control of
basic functions bythis unit. Two external units
can be controlled by this unit.When two exter-
nal units are connected, the allocationof
them to externalunit 1 or external unit2 is
automatically set bythis unit.
! When this units blue/white lead isconnected
to the cars auto-antenna relay control term-
inal, the cars antenna extends when this
units source isturned on. To retract the an-
tenna, turn thesource off.
Turning the unit off
% Press SOURCE and hold until the unit
turns off.
Power ON/OFF
En
13
English
Section
03
