Companion Center SFX ยท Installing the Driver and Software 19
EN
6Only after the restart, connect the device to your
PC with a typical USB cable. The USB port of your
device can be found on the rear side.
7 Your device is detected as a new peripheral device
and registered.
8 If your operating system is Windows XP (Service
Pack 2), an additional window will appear during the
final installation. Select No, not this time, and click
on Next.
9 Under Windows XP, select Install software auto-
matically during the final installation and click on
Next.
Only high-speed certified USB cable
Use only a custom high speed certified
USB cable to connect the device to your
computer. The cable should be no longer
than 1.5 metres.
