13
FEATURES
You can select up to 99 tracks and store them in the
memory in a desired sequence. Any track can be stored
more than once.
1 While playback is stopped, select a track with
∞ or §.
2 Press PROGRAM to store the track.
y PROGRAM lights up; the track number
programmed and P with the total number of
stored tracks are displayed.
3 Select and store all desired tracks in this way.
4 Press 2; to start playback of your selected tracks.
y PROGRAM is shown and playback starts.
• You can review the program by pressing PROGRAM for more than 2 seconds.
y The display shows all stored tracks in sequence.
Notes: – If you press
PROGRAM
and there is no track selected,
SELECt
is displayed.
– If you try to store more than 99 tracks,
FULL
is displayed.
Clearing the program
1 If necessary, press 9 to stop playback.
2 Press 9 to clear the program.
y CLEAr is displayed once, PROGRAM goes off,
and the program is cleared.
Note: The program also will be cleared if you
– interrupt the power supply
– open the CD lid,
– or if the player switches off automatically.
Programming track numbers
MG9218/17 eng 8/25/00 4:47 PM Page 13
