21
English
Clock/Timer
6 Press TUNING 4 ¢ to set the minutes.
7 Press SLEEP/TIMER to confirm the time.
➜ The timer is now set and activated.
● To deactivate timer, in timer setting mode,
press 9.
➜ disappears from the display.
Activating and deactivating
SLEEP
The sleep timer enables the
system to switch off by itself
after a set period of time.
● Press SLEEP/TIMER on the
remote control once or more.
➜ Display shows and one
of the sleep time options in sequence: 60, 45,
30,15, 0, 60... if you have selected a time.
● To deactivate, press SLEEP/TIMER on the
remote control once or more until “ 0“
is shown,
or press STANDBY ON ECO POWER on the
system (or 2on the remote control).
➜ disappears from the display.
Setting the clock
1 In standby mode, press and hold DISPLAY/
CLOCK (DISPLAY/CLOCK/MENU on the
remote control) for 2 seconds.
➜ The clock digits for the hours flash.
2 Press TUNING 4 ¢ to set the hours.
3 Press DISPLAY/CLOCK again.
➜ The clock digits for the minutes flash.
4 Press TUNING 4 ¢ to set the minutes.
5 Press DISPLAY/CLOCK to confirm the time.
Note:
– The backlight for clock display is off in standby.
Setting the timer
● The system can be used as an alarm clock,
whereby the CD, TUNER or iPod is switched on
at a set time. The clock time needs to be set first
before the timer can be used.
1 In standby or active mode, press and hold
SLEEP/TIMER on the remote control.
2 Press SOURCE (CD, iPod or TUNER on the
remote control) to select sound source.
3 Press SLEEP/TIMER to confirm your desired
mode.
➜ The clock digits for the hours flash.
4 Press TUNING 4 ¢ to set the hours.
5 Press SLEEP/TIMER again.
➜ The clock digits for the minutes flash.
MICRO SYSTEM MCM196D
PG001-027 MCM196D_37_IFU_Eng 14/5/07, 13:2021
