A SERVICE OF

logo

43
ENGLISH
43
SPECIAL BEVERAGES
HOT WATER
RISTRETTO
ESPRESSO MILD
ESPRESSO INTENSE
HOT WATER
INSERT
WATER SPOUT
HOT WATER
MEMO
Adjusting the Hot Water Dispensing
Warning:
Danger of scalding! Dispensing may be preceded by short sprays of
hot water and steam. Wait until the end of the cycle before removing
the water dispensing spout.
1
Make sure that the machine is ready for the hot water dispensing.
2
Press the “ ” button to enter the “SPECIAL BEVERAGES” menu.
3
Press the “ ” button until this display is shown, then release the but-
ton.
4
Press “ ” to con rm. The machine will start dispensing hot water.
5
This icon is displayed during preheating time required by the machine.
6
Dispense the desired amount of hot water.
To stop the hot water dispensing, press the Special Beverages “
button again.
The amount of water to dispense is now programmed. Every time it is
selected, the machine will dispense the same amount of hot water that
was programmed.