A SERVICE OF

logo

4535 612 34161 HD3 Service Manual Page 117
CSIP: Level 2 Installation: Physical Installation Procedures
MOD Drive
Figure 5-29 Connecting the USB Cable to the MOD Drive
2
USB cable
1
MOD
To install the MOD drive
1. Place the MOD drive on the HD3
system in a place that is preferable
for your use. It is recommended that
the MOD drive be mounted on a
horizontal surface. Attach it with the
velcro strips supplied with the MOD
drive.
2. Connect the small connector end of
the USB cable to the USB port on
the rear of the MOD drive.