21
English
Lock unsuitable content
You can prevent your children from watching
certain programmes or channels by locking the
TV controls.
Set or change code
1 Press MENU.
2 Select [Setup] > [Channel settings] >
[Child lock].
3 Select [Set code] or [Change code].
» The [Set code] / [Change code] menu
appears.
4 Enter your code using the Numeric
buttons.
» Follow the on-screen instructions to
create or change your PIN code.
Tip
• If you forget your code, enter ‘8888’ to override any
existing codes.
Lock or unlock one or more channels
1 Press MENU.
2 Select [Setup] > [Channel settings] >
[Child lock] > [Channel lock].
» A list of channels is displayed.
3 Select the channel that you want to lock or
unlock, then press OK.
» The rst time you lock or unlock a
channel, you are prompted to enter
your PIN code.
4 Enter your code and press OK.
» If the channel is locked, a lock icon is
displayed.
5 Repeat the process to lock or unlock more
channels.
Note
• To disable the clock, repeat the procedure.
Use timers
You can set timers to switch the TV to standby
at a specied time.
Tip
• Set the TV clock before you use timers.
Automatically switch the TV to
standby (sleep timer)
Sleep timer switches the TV to standby after a
pre-dened duration.
Tip
• You can switch off your TV earlier or reset the sleep
timer during the countdown.
1 Press MENU.
2 Select [Setup] > [TV settings] >
[Preferences] > [Sleep timer].
» The [Sleep timer] menu appears.
3 Select a value between zero and 180
minutes.
» The sleep timer can be set in steps
of ten minutes. If you select zero, the
sleep timer switches off.
4 Press OK to switch on the sleep timer.
» The TV switches to standby after the
specied time.
EN
