A SERVICE OF

logo

Installation and commissioning
19
Fig. 8 - 03
Fig. 8 - 02
1
4
8
.01.02 Assemble the mounted motor
Fix bearing plate 1 on to motor 2 using screws 3, as shown in fi g. 8-02.
Mount drive belt wheel 4 onto motor shaft and attach with screws 5.
Tilt bearing plate 1 with motor 2 slightly to the side and lay drive belt 6 onto the drive belt
wheels.
Align bearing plate 1 of motor 2 with machine housing and attach with screws 7.
Tighten drive belt by pivoting the motor, looses screws 3 slightly to do so.
2
3
5
6
7
7
8
.01.03 Fit the belt guard of the fl ange-motor
Attach belt guard 1 with screws 2.
1
2
2