A SERVICE OF

logo

C3412M (9/06) 9
DOME DRIVE INSTALLATION
Install the dome drive. Line up the blue and red tabs with the blue and red arrows on the hinged door inside the back box.
Push the tabs in. Insert one side and then the other side. Continue pushing on the ends of the tabs until both sides click
into place. Refer to Figure 2.
To use your dome system, refer to the
Getting Started
section.
Figure 2.
Dome Drive Installation
NOTE: When removing a dome drive that has been in use, caution should be taken to avoid direct contact with the top
plate of the unit. This section of the unit will be warm to the touch when first removed from an operating unit.