7 of 23
ISSUED: 04-18-05 SHEET #: 201-9427-7 04-20-10
Hook screen onto wall plate (A) fi gure 6.1. Tighten
M5 x 12 mm screws (C), shown in fi gure 6.2 and
detail 1.
Note: For security models, use 4 mm security allen
wrench (I) to tighten M5 x 12 mm screws (C).
To remove screen from mount, loosen screws (C)
and lift screen off of mount.
Installing and Removing Flat Panel Screen
6
A
SCREEN
• Do not tighten screws with excessive force.
Overtightening can cause damage to mount. Tighten
screws to 20 in. • lb (2.26 N.M.) maximum torque.
CAUTION
• Do not lift more weight than you can handle. Use ad-
ditional man power or mechanical lifting equipment
to safely handle placement of the screen.
• Failure to lock hook bracket with screws (C) can
cause screen to come off mount if hit accidentally.
WARNING
DETAIL 1
fi g. 6.2
fi g. 6.1
A
C
B
B
A
C
© 2009, Peerless Industries, Inc. All rights reserved.
All other brand and product names are trademarks or registered trademarks of their respective owners.
Peerless Industries, Inc.
3215 W. North Ave.
Melrose Park, IL 60160
www.peerlessmounts.com
