50
Operating the answering device from a remote
telephone
(cont.)
■ To erase a specific message
■
Press J D while listening to the message you want
to erase.
■ —A long beep and the voice guide will be heard.
Then the unit will continue with the next message.
■ To erase all messages
Erasing incoming messages from memory
■ Press J E to erase all messages.
—A long beep and the voice guide will be heard.
Voice guide example:
Voice guide example:
■ To monitor the room sound
■
You can monitor the sound in the room where the unit is installed.
Press F.
—You can monitor the room sound for about 30 seconds.
■ Note:
■ ¡After 30 seconds, a beep sounds. To continue monitoring, press F again within 10 seconds.
Other remote operations
The message has been erased.
All messages have been erased.
■ To record a marker message
■
After playing back the recorded messages, you can leave an additional message.
■ 1. Wait for the voice guide to tell you that the
remote operation has ended.
■ 2. Wait about 10 seconds until the voice guide is
played.
■ 3. Leave a message after the beep.
Voice guide example:
All messages have been played.
Please leave your name and message
after the beep.
