- 10 - - 39 -
GGRROOUUNNDDIINNGG IINNSSTTRRUUCCTTIIOONNSS
This vacuum cleaner must be grounded. If it
should malfunction or breakdown, grounding
provides a path of least resistance for elec-
tric current to reduce the risk of electric
shock.This vacuum cleaner is equipped with
a cord having an equipment-grounding con-
ductor and grounding plug.The plug must be
plugged into an appropriate outlet that is
properly installed and grounded in accor-
dance with all local codes and ordinances.
DDAANNGGEERR
Improper connection of the equipment-
grounding conductor can result in a risk of
electric shock. Check with a qualified electri-
cian or service person if you are in doubt as
to whether the outlet is properly grounded.
Do not modify the plug provided with the
vacuum cleaner – if it will not fit the outlet,
have a proper outlet installed by a qualified
electrician.
This vacuum cleaner is for use on a nominal
120-volt circuit, and has a grounding plug
that looks like the plug illustrated in
FFiigguurree AA
.
Make sure that this vacuum cleaner is con-
nected to an outlet having the same configu-
ration as the plug.
No adapter should be used with this vacuum
cleaner.
NNoottee::
Before you plug in your commercial
vacuum cleaner, make sure that the volt-
age indicated on the rating plate located at
the back of the vacuum cleaner is the
same as your local supply.
FFiigguurree AA
PPrroobbllèèmmee CCaauussee ppoossssiibbllee SSoolluuttiioonn ppoossssiibbllee
LL’’aassppiirraatteeuurr 11..
Le cordon d’alimentation
11..
Brancher le cordon d’alimentation.
nnee ffoonnccttiioonnnnee
est débranché. Mettre l’interrupteur à la position
ppaass..
ON.
22..
L’interrupteur est à la position OFF.
22..
Mettre l’interrupteur à la position
ON.
33..
Le disjoncteur s’est déclenché
33..
Réenclencher le disjoncteur
ou un fusible a sauté. ou remplacer le fusible.
LL’’aassppiirraatteeuurr 11..
Full or clogged dust bin.
11..
Clean dust bin.
ooffffrree uunn ppiièèttrree
rreennddeemmeenntt.. 22..
La courroie est brisée.
22..
Remplacer la courroie.
33..
Le tuyau ou la tête d’aspiration
33..
Dégager l’obstruction.
est obstrué.
44..
Le tuyau n’est pas inséré à fond.
44..
Insérer le tuyau correctement.
55..
Les brosses sont usées.
55..
Remplacer l’agitateur.
66..
Le tuyau est troué.
66..
Remplacer le tuyau.
77..
Dirty filters. 7. Clean/Change filters.
Guide de dépannage
AAVVEERRTTIISSSSEEMMEENNTT
RRiissqquuee ddee cchhooccss éélleeccttrriiqquueess oouu llééssiioonnss ccoorrppoorreelllleess..
DDéébbrraanncchheerr aavvaanntt dd’’eennttrreetteenniirr oouu ddee nneettttooyyeerr ll’’aappppaarreeiill.. LL’’oommiissssiioonn ddee ddéébbrraanncchheerr ppoouurrrraaiitt
pprroovvooqquueerr ddeess cchhooccss éélleeccttrriiqquueess oouu ddeess llééssiioonnss ccoorrppoorreelllleess dduu ffaaiitt qquuee ll’’aassppiirraatteeuurr ssee mmeettttrraaiitt
ssoouuddaaiinneemmeenntt eenn mmaarrcchhee..
SSee rreeppoorrtteerr aauu ttaabblleeaauu ccii--ddeessssoouuss ppoouurr rrééssoouuddrree ttoouutt pprroobbllèèmmee mmiinneeuurr éévveennttuueell..
CCoonnffiieerr ttoouuttee rrééppaarraattiioonn àà uunn tteecchhnniicciieenn qquuaalliiffiiéé..
