A SERVICE OF

logo

Open as PDF
next previous
36
Customizing Your Machine
No. Parameter
Setting
Number
Setting Comments
17 RECEIVE MODE
1 Manual
Setting the reception mode either automatic or manual.
2 Auto
22 SUBSTITUTE RCV
1 Invalid
Selecting whether or not the machine receives to memory when
recording
p
a
p
er runs out, toner runs out or recording
p
a
p
er
2 Valid
recording
aer
runs
out
,
toner
runs
out
or
recording
aer
jammed.
23 RECORDING PAPER
SIZE
1 A4
Setting the recording paper size installed in your machine.
(UF
-
550/560only)
SIZE
2 Letter
(UF
-
550/560
only)
3 Legal
24 PRINT REDUCTION
1 Fixed
Selecting print reduction mode.
Fixed:Reduce received document according to setting of
ParameterNo 25
2 Auto
Parameter
No
.
25
.
Auto: Reduce received document according to the length of
received documents.
25 REDUCTION RATIO
70 70%
Selecting fixed print reduction ratio from 70% to 100%. This
p
arameterfunctions only when fixed
p
rint reduction is selected
ĆĆĆ ĆĆĆ
arameter
functions
only
when
fixed
rint
reduction
is
selected
on fax parameter no. 24.
100 100%
26 POLLING PASSWORD (----) Setting a 4-digit password for secured polling.
27 POLLED FILE SAVE
1 Invalid
Selecting whether or not the machine retains the polled
document in memory even after the document is
p
olled once.
2 Valid
document
in
memory
even
after
the
document
is
olled
once
.
28 STAMP AT MEM. XMT
1 Invalid
Selecting whether or not the machine stamps the original
documentswhen storing the documents into memory.
2 Valid
documents
when
storing
the
documents
into
memory
.
(depending on the Stamp setting on the Control Panel.)
30 DRD SERVICE
1 Invalid
Selecting whether or not the machine is available ”DRD
Service”. If this parameter is set to ”Valid”, your machine detects
h ifi d i l i d
2 Valid
,y
the specified ring pattern only to receive a document
automatically.
31 INCOMPLETE FILE
SAVE
1 Invalid
Selecting whether or not the machine retains the document in
memoryif the document is not successfully transmitted.
SAVE
2 Valid
memory
if
the
document
is
not
successfully
transmitted
.
32 COPY REDUCTION
1 Invalid
Selecting whether or not the machine performs copy reduction in
accordance with the setting of Parameter No. 24 and 25.
2 Valid
accordance
with
the
setting
of
Parameter
No
.
24
and
25
.
33 XMT REDUCTION
1 Invalid
Selecting whether or not the machine performs reduction when
thetransmittingdocumentiswiderthantherecording
p
a
p
erused
2 Valid
the
transmitting
document
is
wider
than
the
recording
aer
used
at the receiving machine. (UF-770 only)
34 POWER SAVE TIMER
-- Start-Time
To reduce the power consumption of the machine in standby,
select the time period to turn off the high temperature fuser unit
when the
p
rinter is idle.
-- End-Time
when
the
printer
is
idle
.
Factory default is always ”ON” (When Start = 00:00 and End =
00:00).
Continued on the next page.
03002000001
03002080001
#@multitude
03002080060
03002080019
03002080020
03002080081
03002080022
03002080023
03002080024
03002080085
03002080049
03002080026
03002080027
03002080086
03002080087
03002990001
#@multitude