General Features
Features Guide 205
One-Touch Dialing
Description
One-Touch Dialing offers the PT user One-Touch access to a desired party or system feature
by storing an extension number, telephone number, account code or a feature number (up to 24
digits) in a One-Touch Dialing button. The number of buttons available depends on the type of
PT. One-Touch Dialing buttons can be programmed to flexible buttons: CO, DSS or PF
(Programmable Feature).
Conditions
• Combination dialing
Speed Dialing, One-Touch Dialing, manual dialing, Last Number Redial and Saved
Number Redial can be used together in a combination.
• Storing more than 25 digits
It is possible to store a number consisting of 25 digits or more by dividing it and storing it
in two One-Touch Dialing buttons. In this case, a CO line access code should be stored in
the first button.
• Full One-Touch Dialing
If "Full One-Touch Dialing" is enabled, press the One-Touch Dialing button directly
without going off-hook.
• To store the telephone number of an outside party, a line access code (default=9 or 801
through 848) must be stored as the leading digit.
• Any feature number can be stored in a One-Touch Dialing button.
However, the feature numbers for "Speed Dialing – Station" and "Speed Dialing – Station
Programming" do not function.
Programming Guide References
• 4.3 Extension Line
–COKey
–PFKey
•4.4DSSConsole
–DSSKey
–PFKey
Features Guide References
1.7 Dialing Features
• Full One-Touch Dialing
