Operating the built-in answering device
2When receiving a call, a greeting message will be
played and the unit will record a voice message.
●
To record your own greeting message, see page 16.
Activating the answering device Operating the answering device
from a remote location
1Turn the (Auto answer) light on by pressing .
Listening to recorded messages
When new messages are recorded, the (Auto
answer) light will flash.
Press to listen to recorded messages.
Listening to all of the recorded
messages
Press (Replay/Record).
Erasing a specific message
1Press (Erase) while listening to the message
you want to erase.
2Press .
Erasing all of the recorded messages
1Press
(Record)
.
2Press (Start), then press .
Erasing your own greeting message
2Press (Start) and press .
●
The pre-recorded Japanese greeting message will
be played when you receive a call.
Preparation: Programming the remote operation ID
1. Press (Function).
2.
Press (Search button) repeatedly until the
following is displayed.
3. Press (Start).
4. Enter any 4-digit number (remote operation ID) except
or #.
5. Press (Register).
6. Press (Stop).
Operation: Listening to a recorded message from a
remote location
Turn the (Auto answer) light on before you go out.
Remote operations are available only from a touch tone
telephone.
1. Call your unit.
2. Enter the remote operation ID during the greeting
message.
3. Press or wait 4 seconds.
●
Only the new recorded messages will be played
back.
●
To listen to all the recorded messages, press
after the new messages have been played back.
1
Press (Record) and press (Search button)
repeatedly until the following is displayed.
