1. Introduction and Installation
15
1.8 Recording paper
The paper input tray unit can hold:
– Up to 250 sheets of 60 g/m
2
to 75 g/m
2
paper.
– Up to 230 sheets of 80 g/m
2
paper.
– Up to 200 sheets of 90 g/m
2
paper.
L Please refer to page 94 for information on recording
paper.
L The unit is set for printing A4 size paper by
default. If you want to use letter or legal size
paper, change the setting (feature #380 on page
56).
1 Pull the paper input tray (1) completely out.
2 Pinch the front side of the recording paper guide
(1), then slide it to match the paper size mark.
Pinch both sides of the recording paper guides (2),
then slide them to match the paper size mark.
3 Before loading a stack of paper, fan the paper to
prevent paper jams.
4 Load the paper, print-side up (1).
Important:
L Push and lock the plate (2) in the paper input
tray, if it is lifted.
L Make sure that the recording paper guides (1)
are at the paper size mark and the recording
paper is under the paper limit mark (2). The
paper should not be loaded over the snubbers
(3).
1
1
A4
LTR
LGL
2
2
2
1
1
3
1
FLB882CX-PFQX2773ZB-OI-en.book Page 15 Friday, October 5, 2007 11:45 AM
