Network Problem Solving Problem Solving
129
Job Management Problem Solving
This section lists error messages you might see, and provides some
troubleshooting guidelines should a problem arise with the Printer. If you are
unable to resolve a problem after referring to this chapter, contact your
authorized service/support center.
Job Management Error Messages
Error messages can result from problems with the print job, a server, or the
DP-C106. Some of the most common error conditions are listed here.
Message Corrective Action/Additional
Information
Check power & cable Ensure that the Printer is On and all the
cables are secure.
Check scanner power & cable Ensure that the scanner is On. Check
that the cable between the Printer and
the scanner is securely connected.
Communication failure while printing.
Please resubmit job.
An Printer error occurred. Try printing
the job again.
Copier busy The DP-C106 has received a print job
while running a copy job. The job will
print when the copy job has completed.
Copier in Energy Save Mode The DP-C106 is in Energy Save Mode.
You must wait for the DP-C106 to
warm-up before printing.
Copier offline The Suspend Printing option has been
selected from the Functions menu.
Press Resume Printing in the
Functions menu.
Platen Scan in progress The Printer is completing a scan and
will be ready for printing in a few
minutes.
Print/Copy Cartrdg. misplaced The Print/Copy Cartridge is not
correctly placed in the Printer. Check
the cartridge and reinstall it as
necessary.
