
39
Customizing Your Machine
No. Parameter
Setting
Number
Setting Comments
12 COMM. JOURNAL 1 Off Selecting the home position of printout mode for COMM.
2 Always
ourna
ways
.
Off : No printout
p
*3 Inc. only
ways :
ways pr
n
s ou
Inc. only : Printout when communication has failed.
13 AUTO JOURNAL PRINT 1 Invalid Selecting whether the machine prints the journal
automaticall
after ever
32 transactions.
*2 Valid
.
14 FILE ACCEPTANCE
REPORT
*1 Invalid Selecting whether the machine prints the file acceptance
journal. If you set this parameter to valid, the journal will
2 Valid
be printed out after entering any communications using
memory.
17 RECEIVE MODE 1 Manual Setting the reception mode to either automatic or manual.
*2 Auto
22 SUBSTITUTE RCV 1 Invalid Selecting whether the machine receives to memory when
p
p
er runs out toner runs out or recording
p
p
*2 Valid
recor
ng paper runs ou
,
oner runs ou
or recor
ng paper
is jammed.
24 PRINT REDUCTION
1 Fixed
Selecting print reduction mode.
Fixed:Reduce received document according to the setting
*2 Auto
o
arame
er
o.
.
Auto: Reduce received document according to the length of
received documents.
25 REDUCTION RATIO 70 70% Selecting fixed print reduction ratio from 70% to 100%. This
p
arameter functions only when fixed
p
ĆĆĆ ĆĆĆ
parame
er
unc
ons on
y w
en
xe
pr
n
re
uc
on
s
selected on Fax Parameter No. 24.
100 100%
26 POLLING PASSWORD (----) Setting a 4-digit password for secured polling.
27 POLLED FILE SAVE *1 Invalid Selecting whether the machine retains the polled
document in memory even after the document is
p
2 Valid
ocumen
n memory even a
er
e
ocumen
s po
e
once.
28 STAMP AT MEM. XMT 1 Invalid Selecting whether the machine stamps the original
documents when storing the documents into memory
*2 Valid
ocumen
s w
en s
or
ng
e
ocumen
s
n
o memory.
(dependant on the Stamp setting on the Control Panel.)
31 INCOMPLETE FILE
*1 Invalid Selecting whether the machine retains the document in
memory if the document is not successfully transmitted
2 Valid
memory
e
ocumen
s no
success
u
y
ransm
e
.
34 POWER SAVE TIMER
-- Start-Time
To reduce the power consumption of the machine in
standby, select the time period to turn off the high
p
erature fuser unit when the
p
-- End-Time
empera
ure
user un
w
en
e pr
n
er
s
e.
Factory default is always ”ON” (When Start = 00:00 and
End = 00:00).
Continued on the next page.
03002000001
03002080001
#@multitude
03002080011
03002080084
03002080013
03002080060
03002080019
03002080081
03002080022
03002080023
03002080024
03002080085
03002080026
03002080087
03002990001
#@multitude
3