-32-
● Preset Identification Setting (PRESET
ID)
Assigns a name to preset IDs (identification of up to 16
alphanumeric characters) and can be switched on or
off on the monitor screen.
1. Move the cursor to PRESET ID on the preset setting
menu and select ON or OFF by moving the joystick
to the right or left.
The factory default setting is OFF.
2. Press the CAM (SET) key to display the preset ID
setting menu.
To Enter a New Preset ID
(1) Move the cursor to the desired character using
the joystick, and press the CAM (SET) key.
(2) The selected character appears in the editing
area. (The pointer in the editing area moves to
the right automatically at this moment.) To
enter a blank, select SPACE.
(3) Repeat the above procedure until all charac-
ters are entered.
To Copy a Preset ID from Another Position
(1) Move the cursor to COPY and press the CAM
(SET) key. First the preset ID in the preceding
position is shown. Each consecutive pressing
of the CAM (SET) key displays the ID preced-
ing the one currently displayed.
(2) Display the desired ID.
(3) Follow the step "To Change an Entered Preset
ID" if necessary
To Set a Display Position for a Preset ID
(1) Move the cursor to POSI and press the CAM
(SET) key. The display position set menu
appears.
(2) Move the ID to the desired position by using
the joystick, and press the MON (ESC) key.
The display position is set and the monitor
screen returns to the preset ID setting menu.
To Enter the Next ID without Returning to the
Preset Setting Menu
(1) In the preset ID setting menu, move the cursor
to the top line and select a desired position
number by moving the joystick to the right or
left.
(2) Enter, copy, change or delete the ID as
described above.
To Return to the Preset Setting Menu
Move the cursor to RET and press the CAM (SET)
key.
PRESET NO. 1
PRESET NO. 1
................
PRESET NO. 1
................
PRESET NO. 1
................
PRESET NO. 1*
DOOR............
