A SERVICE OF

logo

10
3. Using the Unit
3.4
Using the Memory Function
The monitor automatically stores the result up to 60 sets. It can also calculate an
average reading based on the measurements from the last three readings taken
within 10 minutes. If there are only two readings in memory for that period, the
average will be based on two readings. If there is one reading in memory for that
period, the average will be based on one reading.
Notes:
If the memory is full, the monitor will delete the oldest readings.
When viewing the reading taken without setting the date and time, “-:--” is displayed instead of the date
and time.
Previous ReadingAverage Value
Alternating date/time display
Old Recent
View the Average
Value
If the previous reading
was taken without
setting the date and
time, the average
value is not calculated.
View the Previous
Reading
The Memory number
appears for a second
before the pulse rate is
displayed. The newest
set is numbered “1”.
View the Readings
Stored in Memory
HEM-7200-E(V)_A_M_main.book 10 ページ 2012年2月14日 火曜日 午後12時12分