4
Preparation
Removing the Insulating Tape
Pull the insulating tape out from the battery
compartment by catching the outer part for the first time.
The unit is turned on and after 1 minute the room
temperature will appear on the display.
Notes:
• The room temperature remains on the display even after the unit turns off.
• Place the unit on the table and avoid the direct sunshine or air conditioner flow on for the room temperature.
Switching between °C and °F
This unit is set in °C as default.
1. While the room temperature is displayed, press and hold the START
button.
2. While holding it down, press and hold the
ON/MEM button until °F appears on the display
with 2 beeps.
Notes:
• To select the °C mode, start from step1.
• When the unit is switched between °C and °F, all the readings stored in the
memory are deleted.
