57 – C610/C711 User’s Guide
Boot Menu
This menu should only be changed by the System Administrators. In order to
gain access to this menu, follow the instructions in “How to Change the
Settings: Administrator” on page 27.
This menu is in English only (default settings in bold type).
Parallel Setup
This menu controls the operation of the printer’s Parallel data
interface.
Cyan/Magenta/
Yellow/Black
Tuning
Highlight –3,–2,–1,
0,+1,+2,+
3,
Adjusts HIGHLIGHT (light area)
of the TRC.
+ = Darker
– = Lighter
Mid-Tone –3,–2,–1,
0,+1,+2,+
3,
Adjusts MID-TONE area of the
TRC.
+ = Darker
– = Lighter
Dark –3,–2,–1,
0,+1,+2,+
3,
Adjusts DARK area of the TRC.
+ = Darker
– = Lighter
Cyan/Magenta/
Yellow/Black
Darkness
–3,–2,–1,
0,+1,+2,+
3,
Adjusts the engine density.
Note:
This menu item only applies to the C711.
ITEM SETTINGS EXPLANATION
Enter
Password
xxxxxxxxxxxx Enter a password to access the Boot menu.
Password should be from 6 to 12 digits of
alpha/numeric characters (or mix)
The default value is “aaaaaa”
Parallel Enable /
Disable
Enables or disables the parallel port.
ITEM SETTINGS EXPLANATION
