A SERVICE OF

logo

NONLINEAR STRESS-STRAIN BEHAVIOUR AND STRENGTH
6-11
References
6.1 B. N. Cox, M. S. Dadkhah, and W. L. Morris, “Failure Mechanisms of 3D Woven Composites in
Tension, Compression, and Bending,” 42[12], 3967-84 (1994).
6.2 L. N. McCartney, “Theory of Stress Transfer in a 0°/90°/0° Cross-Ply Laminate Containing a
Parallel Array of Transverse Cracks,” J. Mech. Phys. Solids 40, 27-68 (1992).
6.3 D.M. Blackketter, D.E. Walrath, and A.C. Hansen, "Modeling Damage in a Plain Weave Fabric-
Reinforced Composite Material," J. of Composites Technology & Research 15[2], 136-142
(1993).
6.4 B. Budiansky and N. A. Fleck, “Compressive Failure of Fiber Composites,” J. Mech. Phys.
Solids 41[1], 183-211 (1993).
6.5 K. Pochiraju, T-W. Chou, and B. M. Shah, "Modeling Stiffness and Strength of 3-D Textile
Structural Composites," to appear in the Proceedings of 37th joint
AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Salt
Lake City, 1996.
6.6 K. Pochiraju, T-W. Chou, and B.M. Shah, "Experimental Characterization of 3-D textile structural
Composites," to appear in the Proceedings of the 37th Joint AIAA/ASME/ASCE/AMS/ASC
Structures, Structural Dynamics, and Materials Conference, Salt Lake City, 1996.
6.7 M. S. Dadkhah, W. L. Morris, T. Kniveton, and B. N. Cox, "Simple Models for Triaxially
Braided Composites," Composites 26, 91-102 (1995).
6.8 J. M. Hedgepeth and P. Van Dyke, “Local Stress Concentrations in Imperfect Filamentary
Composite Materials,” J. Comp. Mater. 1, 294-309 (1967).
6.9 M. A. McGlockton, R. M. McMeeking, and B. N. Cox, “The Strength of Ceramic Matrix
Composites,” to be submitted to Acta Metall. Mater.
6.10 W. A. Curtin, “The ‘Tough’ to Brittle Transition in Brittle Matrix Composites,” J. Mech. Phys.
Solids 41, 217-245 (1993).
6.11 J. Xu, B. N. Cox, M. A. McGlockton, and W. C. Carter, "A Binary Model of Textile Composites
- II. The Elastic Regime," Acta Metall. Mater. 43[9], 3511-24 (1995).
6.12 A. K. Roy, “In Situ Damage Observation and Failure in Model Laminates Containing Planar Yarn
Crimping of Woven Composites,” Mechanics of Composite Materials and Structures, in press.
6.13 B. N. Cox, M. S. Dadkhah, W. L. Morris, and J. Zupon, “Mechanisms of Compressive Failure in
3D Woven Composites,” Acta Metall. Mater. 40[12], 3285-98 (1992).
6.14 G. Flanagan, unpublished work; see also J.M. Whitney, D.L. Stanbarger, and H.B. Howell,
"Analysis of the Rail Shear Test - Applications and Limitations," J. Composite Materials 5[1],
24-34 (1971).
6.15 P. J. Minguet, M. J. Fedro, and C. F. Gunther, Test Methods for Textile Composites, NASA
Contractor Report 4609, Boeing Defense and Space Group, Philadelphia, 1994.
6.16 N. A. Fleck, "Brittle Fracture due to an Array of Microcracks," Proc. R. Soc. London A432, 55-
76 (1991).