Q
®
®
®
®
®
®
®
®
select buttons
Use these buttons to select the component you wish to operate:
the TV, a cable decoder box, or a VCR. These buttons are also
used to set up your remote control for your particular brand of
cable box or VCR.
VCR buttons
These buttons can be used to control VCRs. The remote control
is pre-set to operate Mitsubishi VCRs, and it can be
programmed to operate VCRs from other manufacturers.
power button (POWER)
Use this button to turn the TV on or off. When you turn the TV
on, the power indicator lights in green.
mute control (MUTE)
Use this button to turn the sound off completely or to restore it
to its original volume.
super quick view button (SQV)
Press this button to view the channels that you have
programmed into super quick view memocy. (See page 52.)
quick view button (QV)
Press this button to instantly switch to the channel that you
memorized as the quick view channel. If you are viewing the
quick view channel, you will switch to the last channel you
were watching. (See page 52.)
volume control (VOLUME)
Press the top part of the button to turn u]o the volume',; press
the bottom part of the button to turn down the volume.
input button (INPUT)
Use this button to select the input source you wish to view:
• Antenna-A,
• Antenna-B,
• Input-l, or ..
• Input-2.
channel control (CHANNEL)
Press the top part of this button to change to a channel with a
higher number; press the bottom part to change to a channel
with a lower number.
Overview of the Remote Control 17
