112 113
This section contains detailed information on controlling the camera’s functions and
operation as well as creating and selecting image folders. The navigating the setup
menu section (p. 114) covers the operation of the setup menu. The section is followed
by detailed descriptions of the settings.
SETUP MODE
CONTROLLING THE
CAMERA’S OPERATION
VIEWING IMAGES ON A TELEVISION
It is possible to view camera images on your television. The camera has a video-out
terminal which can be used to connect the camera to a television using the supplied
video cable. The camera is compatible with the NTSC and PAL standards. The video-
output setting can be checked and set in the custom 2 section of the setup menu (p.
114).
Turn off the television and the camera.
Insert the mini-plug end of the video cable into the
camera’s video-out terminal.
Plug the other end of the video cable into the
video-input terminal on the television.
Turn the television on.
Turn the camera’s mode dial to the playback position.
• The camera’s monitors will not activate when the camera is attached to a television. The
playback-mode display will be visible on the television screen.
Change the television to the video channel.
View images as described in the playback section.
1
1.
2.
3.
4.
5.
6.
7.
