10
Slide the FUNCTION switch to
the TAPE position.
1
Press the PLAY (➛) button to
begin playback.
4
Insert a pre-recorded cassette into
the slots in the Cassette Door with
the open end facing up and the full
reel on the right side. Close the
cassette door.
3
Press the STOP/EJECT ( )
button to open the Cassette Door.
2
To pause playback momentarily,
press the PAUSE ( ) button. The
tape movement stops but the tape
motor is still running. Press the
PAUSE ( ) button again to
release Pause and resume
normal playback.
7
When the tape reaches the end,
the auto-stop mechanism
activates, the PLAY (➛) button is
released and the tape motor
shuts off. Press the STOP/EJECT
( ) button to open the Cassette
Door and remove the tape.
9
To stop playback before the tape
ends, press the STOP/EJECT
( ) button. The PLAY (➛)
button is released and the tape
motor shuts off.
8
Adjust the VOLUME ❶ and BASS
BOOST ❷ as desired.
5
To advance or rewind the tape
rapidly, press either the F.FWD
(➛➛) ❶ or REWIND (❿❿) ❷
button. When you reach the
desired point, press the PLAY
(➛) button ❸ to resume normal
playback.
