A SERVICE OF

logo

Step4 : Router setting
NOTE : In the router setting, we have four steps as follows.
1. Dial setting
2. DHCP setting
3. Virtual server setting
4. DDNS setting
2. Press LOCAL PORTand set Start IP addressand Number of IP address.
(For example, if the IP address of DVR is 192.168.1.10,then 10 is excluded from the setting range) Press
save after you finish setting up.
30
1.Press INTERNER PORTand choose your WAN type (e.q. PPPoE), and then enter
your User Nameand Passwordof dialing up to dynamic IP. Press save after
you finish the set up.
test