Speaker 47
E-EQ-MX5PCRG-F-ARC MX5 Reference Guide
Speaker
Figure 2-13 Speaker Location
The MX5 Speaker has a loudness of at least 87 dB (1500 Hz) at 10 cm measured from the front of
the unit. The Speaker volume is adjustable via the keypad or the Settings or by an application
through the use of an API call. There are 5 distinct volume levels. The minimum volume level is 0
(no sound) with a default setting of 3. The volume sticks at maximum and minimum levels.
The speaker is disabled when a headset is plugged into the Audio Jack on the endcap. The audio
volume can be adjusted to a comfortable level for the user. The volume is increased or decreased
one step each time the volume key sequence is pressed.
Speaker volume is first enabled and adjusted using the “Sounds & Reminders" icon. The default
value for Sounds and Reminders is midrange Volume and all sounds enabled. When volume and
sounds are enabled, speaker volume can be adjusted using the volume key sequence, if desired.
Note: An application may override the control of the speaker volume. Turning off sounds saves
power and prolongs battery life.
Using the Keypad
Note: Sounds & Reminders must have the options below “Enable sounds for” enabled before
the following key sequences will adjust the volume.
To adjust speaker volume, locate the <V> key and the Blue key. Adjust the speaker volume by
pressing the:
• Blue key, then the <V> key to enter Volume change mode.
• Use the Up Arrow and Down Arrow keys to adjust volume until the speaker volume is
satisfactory.
• Press the Enter key to exit this mode.
Using the Touch Screen
Pocket PC 2000 The volume is adjusted using Windows icon | Settings | Personal tab | Sounds
& Reminders icon then select the Volume tab.
Pocket PC 2002 The volume is adjusted using Windows icon | Settings | Personal tab | Sounds
& Notifications icon then select the Notifications tab.
Change the volume setting and tap OK to save the change. You can also select / deselect sounds
for key clicks and screen taps and whether each is loud or soft.
Sounds specific to primary events are selected using the options on the Sounds tab.
Reminder/Notification tones are selected using the options on the Reminders/Notifications tab.
As the volume scrollbar is moved between Loud and Silent, the computer will emit a beep each
time the volume increases or decreases in decibel range.
