Appendix A Key Maps
The VX6 Keypad
The key map table that follows lists the commands used for the VX6. Note that since the VX6
uses a Microsoft Windows CE .NET operating system, no DOS Terminal Emulation keypress
sequences are provided.
Key Map 101-Key Equivalencies
When using a sequence of keys that includes the <2
nd
> key, press the <2
nd
> key first then
the rest of the key sequence.
Note: The VX6 keyboard does not have a NumLock indicator. NumLock is enabled by default.
The warmboot behavior of NumLock can be configured. Please refer to Chapter 4,
“System Configuration” in the VX6 Reference Guide. When NumLock is off, only the
numeric 0 through 9 and DOT keys are affected. All other keymaps are unchanged.
When the VX6 boots, the default condition of Caps (or CapsLock) is Off. The Caps (or
CapsLock) condition can be set toggled with a <2nd>+<F1> key sequence. The CAPS
LED is illuminated when CapsLock is On.
Press These Keys and Then
To get this key
2
nd
Shift Ctrl Alt CapsLock
Press this key
Suspend/Resume
1
x F3
2
nd
2
nd
Shift Shift
Alt Alt
Ctrl Ctrl
Esc Esc
Space Sp
Enter Enter
1
The Suspend/Resume key has no function as Windows Power Management controls
the power management modes.
