Phoneline 10M USB Network Adapter
27
Linksys HomeLink™ Series
26
Starting Over in Windows 98
If you experience installation difficulties, you may need to reinstall all of the
Windows networking components from scratch. The instructions below
explain how to give your PC a clean sweep so you can retry the HomeLink
Phoneline 10M USB Network Adapter’s driver installation.
1. On your Desktop, click on the Start Button, highlight Settings, and click
on Control Panel.
2. Double-click on the Network icon.
3. If the Configuration field has a component called Dial-Up Adapter, skip
forward to step 5. If it doesn’t, continue with step 4.
Novell NetWare 3.x Client Setup for Windows 98
The instructions below explain how to set up the regular Novell NetWare 3.x
client for use on a Windows 98 PC.
1. Follow the Windows 98 setup instructions.
2. Start up Windows 98. Click on Start, Settings, then Control Panel.
Double-click on Network. The Network window appears. Click on the
Configuration tab.
3. In the Primary Logon field, choose Client for NetWare Networks. If you
don’t see this option, see page 25 to install this component.
4. Under the The following network components are installed window, high-
light Client for NetWare Networks and click on the Properties button.
5. The Client for NetWare Networks Properties window appears. Under the
General tab, enter the name of your network’s Preferred Server. Assign the
First Network Drive Letter; the default is F. Make sure the Enable logon
script processing is checked.
6. Click OK. Click on the Access Control tab. Make sure the Share-level
access control option is selected; do not select User-level access control.
7. When you’re done, click OK to restart your PC.
The NetWare Client portion of your Windows setup is now complete.
