10/100 USB Network Adapter
10
6. A window will open saying that Windows is now ready to install the
Linksys EtherFast 10/100 USB Network Adapter driver. Click Next.
7. Windows will begin copying the driver files to your PC. Refer to the chart
below to help guide you through the process.
• If your PC asks for the Linksys
Setup or Driver Disk
• If you are asked to supply
your Windows 98 Installation
Files or Disks
• If you are asked for a file that
includes “USB100TX” in its
name
• If you receive a Version
Conflict error
1. Click
OOKK
.
2. Ensure that the
LLiinnkkssyyss DDrriivveerr DDiisskk
is in your
PC’s floppy drive.
3. Type “a:\win98” in the “Copy files from:” box.
4. Click
OOKK
.
1. Click
OOKK
.
2. If you have a
WWiinnddoowwss 9988 CCDD--RROOMM
, type
“d:\win98” in the “Copy files from:” box, where
“d:” is your CD-ROM drive.
3. If you
don’t
have a
WWiinnddoowwss 9988 CCDD--RROOMM
,
type: “c:\windows\options\cabs”.
4. Click
OOKK
.
1. Insert the
LLiinnkkssyyss DDrriivveerr DDiisskk
into your PC’s
floppy drive.
2. Type “a:\win98” in the “Copy files from:” box.
3. Click
OOKK
1. Choose to keep the newest version of the file
by clicking
YYeess
.
Under no circumstance are you to click Cancel or Skip File!
Linksys EtherFast
®
Series
9
4. Select "Search for the best driver for your device (Recommended).” Click
Next.
5. Select “Specify a location” to find the correct driver and type in
A:\Win98. Click Next to continue.
NNoottee::
Windows 98 may
ask you for a
ccoommppuutteerr oorr
wwoorrkkggrroouupp nnaammee
. If so,
skip ahead to the instruc-
tions on page 17. Once
you have established your
computer and workgroup
names, return to where
you left off and continue
with the installation.
