Chapter 4: Installation and
Configuration of the USB
Adapter for Windows 98SE, Me,
and 2000
This Wireless USB Network Adapter Setup Wizard will guide you through the
Install and Uninstall Procedures for Windows 98SE, Me, and 2000.
Insert the Setup Wizard CD into your CD-ROM Drive. The Setup Wizard
should run automatically and Figure 4-1 should appear. If it does not, click the
Start button and choose Run. In the box that appears, enter D:\setup.exe
(where “D” is the letter of your CD-ROM drive).
Note to Windows 98, Me, and 2000 users: You must install this
software before installation of the hardware.
Figure 4-1
Important for Windows XP users: Do NOT run the Wireless
Network Adapter Setup Wizard. Proceed directly to Chapter 5:
Connecting Your Wireless USB Network Adapter.
6
The LED Indicators
Power Green. The Power LED lights up when the Wireless USB
Network Adapter is powered on.
Link Green. The Link LED lights up when the Adapter has an
active connection. If the LED is not on, the Adapter is not
interfacing with the network.
Wireless USB Network Adapter
Note: Windows 95 and NT do not support the USB Adapter.
Figure 3-2
5
Instant Wireless
TM
Series
