&')+ &%
'&.)S$* %#. ))
')&**# $ ++ &%*
The Power Feed™ 10M Single Wire Feeder is not
suitable for:
• SAW
• GTAW with HF
Not all weld modes or processes described in this manual are avail-
able on all Power Wave power sources.
)(, )(, '$%+
Lincoln’s Power Feed™ 10M Single Wire Feeder is
designed for use with the Power Wave family of power
sources. These include:
• Power Wave 355 • Power Wave 455M CE
• Power Wave 455 • Power Wave 455M STT
• Power Feed 455/STT • Power Wave 455M STT CE
• Power Wave 455M • Power Wave 655
+ &%#)(, )(, '$%+
• Drive Roll Kits
• Control Cables
• Gun and Cable Assembly
• Weld Wire
• Shielding gas
• Work Cable and Clamp
(, '$%+# $ ++ &%*
• The Power Feed™ 10M Single Wire Feeder does
not operate with the Power Wave 450.
• The Power Feed™ 10M Single Wire Feeder does
not operate with any analog based power sources
(CV-xxx machines, DC-xxx machines, etc.)
• The Memory Panel is required to set procedure limits.
• The Boom model does not support push-pull guns
or GTAW welding.
• A push-pull gun and foot amptrol may not be
plugged into the Power Feed™ 10M Single Wire
Feeder at the same time.
• Spool guns do not operate with the Power Feed
10M.
')&,+*) '+ &%
7@7D3>':KE;53>7E5D;BF;A@
The Power Feed™ 10M Single Wire Feeder is a mod-
ular wire feeder, consisting of two components - a
I;D76D;H7 and a 5A@FDA>4AJ - are available assem-
bled as a 47@5:G@;F or as a 4AA?EKEF7?. High
speed, highly reliable digital cables connect the com-
ponents together and to the Power Wave power
source.
The Power Feed™ 10M Single Wire Feeder system
has the ability to connect multiple wire feeders to one
power source, use the same power source to weld in
two different locations (not simultaneously), or load a
different electrode on each feeder to eliminate change
over time.
The powerful four roll wire drive system sets the
industry standard for ease of use. Its patented design
allows for tool-less change out of wire guides and
drive rolls greatly reducing set up time.
7@7D3>G@5F;A@3>7E5D;BF;A@
• The Power Feed™ 10M Single Wire Feeder is a
highly versatile wire feeder with easy to use fea-
tures that make it easy for the operator to adjust the
arc for specific preferences.
• The new MSP4 panel clearly displays key welding
information. Use the MSP4 panel to quickly adjust
weld settings, arc starting parameters, arc end para-
meters and set-up variables.
• The Power Feed™ 10M Single Wire Feeder wire
feeder is provided with an infrared red (IR) port.
Transferring welding settings from one wire feeder
to another is accomplished with a common palm
computer.
• When the Power Feed™ 10M Single Wire Feeder is
coupled to a Power Wave welding power source,
the result is a welding system with absolutely supe-
rior arc performance.
)&$$%')&***
The Power Feed™ 10M Single Wire Feeder is well
suited for all MIG welding processes, giving premium
arc performance especially with unusual alloys and
out of position work.
• GMAW • SMAW
• GMAW-Pulse • GTAW (Touch Start TIG only)
• GMAW-STT • CAG
• FCAW
