Tuning in TV Stations Manually
In certain areas of the country broadcast signals may
be too weak for your DVD/VCR Combi
receiver automatic tuning process to find or assign TV
stations correctly.
You must tune in these weaker broadcast
stations manually in order for your DVD/VCR Combi
receiver to store them
.
1. Press i.
The main menu will appear on the TV screen.
Press 1 or 2 to select the PR SET.
Press OK.
2. Press i.
The station table will appear.
Press 3 or 4 to select the programme number
that you want to tune (for example, PR 09).
3. Press OK.
Press AV to select C (Standard stations) or S
(Cable stations):
C02 - C69, S01 - S41.
Enter the channel number of station that you want
to tune with the numbered buttons or use 3 or 4
to find the required station.
4. Searching will stop when it locates a station.
Press 2 to select MFT.
Press 3 or 4 to adjust.
5. Press 2 to select STATION so that you may name
your TV station.
Press OK.
The TV station name list will appear.
6. Press
D or E to select a station name from the list.
Press OK to select it.
7. You can change a TV station name manually
rather than using the “standard” names.
Press
G.
Press 3 or 4 to select letters and numbers for
the new station name.
Press 1 or 2 to move back and forth between
characters.
Press OK.
8. Press i, confirm the station placement.
Press i again.
Your new TV station has now been tuned into your
DVD/VCR Combi receiver
.
If you wish to manually tune other stations repeat
stages 1 - 8.
Dr.
