Chapter 5. GM PROGRAMMING
5 -9
4) Programming example
and initial setting
Execution request when the
initializing function block is not
operated
It indicates on when operated normally,
and off when operated abnormally or down
from Live data of opposite station
It indicates information on
power-off state of
opposite
station. If restored, it turns
“On” and the “On”
state is
retained until the user
program turns it “Off”.
Slot location number of master
communication module
Address of remote
station
A/D conversion module
A/D conversion module
spec ification
specification
enable/disable specification
number specification
Execution request on the reading function
block with communication intervals.
master communication module
Address of remote station
A/D conversion module
A/D conversion module
Error data display
occurring error
Normal channel
operation display
Error data display in processing of
initialization function block
Error code display in processing of
initialization function block
display
The digital value less than
2000 of channel 0
turns %Q0.1.0 on.
The digital value more than
2000 or same, and less than
3000 or same turns %Q0.1.1
on.
The digital value more than
3000 or same, and less
than 4000 turns
on.
The digital value more than
12000 or same
turns %Q0.1.3 on.
A/D conversion value
ADR3INI
_EN
READY
_NUM
_NETO_RST[1]
ADR3RD
%Q0.1.0
%Q0.1.1
% Q0.1.2
%Q0.1.2
