43 42
Save template by default
We recommend that you always leave this option
enabled (checked). This option selects the Save
as Template check box in the last screen of the
form-fill wizard. When checked, it protects you
from accidentally exiting MASTERFORM without
saving your shipment as a template by prompting
you for a template name.
Allow Proper Shipping Name edits
This option should be used with caution. When
selected, it allows you to change a material’s
proper shipping name. You then run the risk of
making a mistake and violating UPS or DOT
regulations. Please use with caution!
Exemption Packaging
This option allows you to enable the Exemption
Packaging field found on the Ground/Air Shipment
screen where your mass/capacity is entered. If
the field is grayed out, it is because no exemption
number is required by UPS. If you select this
option, it allows you to override the UPS table
information and enter an exemption number anyway.
Also included in Masterform v3.0.1 or earlier:
Print Ahead Mode
When selected, this option allows you to leave
certain fields blank so that you can fill them in
later by hand.
NOTE: As of January 6, 2003, this option can no
longer be used. See p. 61 for more information.
REMEMBER! Always click Done when you leave
Setup to ensure your changes are saved.
2) In the Log # column, enter your UPS log book
number. Each UPS account number must have
a unique corresponding log book number.
These numbers are assigned to you by
Labelmaster Software. If you need a number,
call 1-800-578-4955.
3) The Sequence # column can be left alone.
See How log book numbers work.
CONFIGURE REPORTS
Click the document buttons to specify a printer
and paper size for each. Be sure to click the
Recommend button for each. This will default to
the settings recommended by Labelmaster. See
General Printing Overview for more instructions.
CHOOSE OPTIONS
Bypass Authorization Screen
This option controls access to the name and
password screen. If security is not an issue for
you, choose this option to avoid having to enter
a name and password each time you use
MASTERFORM. This option is checked by
default in MASTERFORM v3.0.2 or later.
Package Label Warning
This option controls the warning message the
appears whenever you leave the Ground/Air
Shipment screen (where mass/capacity and labels
required are entered). When this option is
selected, the warning will appear to remind you to
double-check the Labels Required field.
This option will be enabled by default when you
install MASTERFORM. If you want to turn the
warning message off, deselect (uncheck) the
Package Label Warning check box.
