CLEANING CD
IftheCDskipsorwillnotplay,thediscmayneedcleaning
.Beforeplaying,wipethediscfromthecentreoutwitha
cleaningcloth.Afterplaying,storethediscinitscase.
CLEANING THE UNIT
Donotusevolatilechemicalsonthisunit.Cleanbylightly
wipingwithasoftcloth.
IMPORTANT NOTE
Ifanabnormaldisplayindicationoranoperatingproblem
occurs, disconnect the AC power cord and remove the
batteries. Wait at least 5 seconds, then reconnect the AC
power cord or reinstall the batteries.
WARNING
ShouldtheCDdoorbeopenedbeforethereadingofthe
CDcompleted,ajammingnoisemayoccur.Thisisresolved
byclosingtheCDdoor.
MAINTENANCE
CLEANING THE TAPE HEADS
Tomaintainoptimumsoundquality,cleantheplayback
heads(a),pinchrollers(b),andcapstans(c)regularly
(every10hoursofuse).Useacottonswablightlymoistened
withcleaninguidordenaturedalcohol.
b c a
CLEANING THE CD LENS
If the CD lens is dusty, clean it with a brush-blower. Blow
several times on the lens and remove the dust with the
brush.Fingerprintsmayberemovedwithacottonswab
moistened with alcohol.
GB 5
TAPE PLAYBACK
1 . Set to TAPE
TO STOP PLAYBACK
Press the STOP / EJECT button.
TO INTERRUPT PLAYBACK
Press the PAUSE button.
Toresumeplay,pressthePAUSEbuttonagain.
TO FAST WIND
Press the REWIND or F.FWD button. Press the STOP/
EJECTbuttontostopwindingatthedesiredposition.
FUNCTION
3 . Press the PLAY button.
2 . Insert the cassette.
PLAY
TAPE
If the unit is automatically off at Cass mode when ErP2 activates, pls press up all the cass keys before switch to
other mode in order to switch on the unit again.
Unit will be automatically off after 10mins without further operation.