![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/2/65/265001ec-aead-486b-b621-116572f6c2c6/265001ec-aead-486b-b621-116572f6c2c6-bg4d.png)
User Guide for the Kyocera Slider Remix KX5 Phone 69
To activate the Voice Wake-up setting:
1. Select Menu → Settings →
Voice Features → Voice Wake-Up →
With accessory.
2. Select Menu → Settings → Keyguard →
Disabled, then press .
To wake up the phone:
1. Say “Wake Up” and listen for a tone.
2. Say “Wake Up” again until you hear two tones.
If the phone does not recognize your
“Wake up” command, see “Training voice
recognition” on page 70.
Answering the phone
You can set your hands-free car kit to (1) answer
automatically or (2) answer using a
voice command.
Answering automatically
You can set your phone to answer automatically.
Note: This setting also works with the portable
hands-free car kit.
• Select
Menu → Settings → Accessories →
Auto-Answer → After 5 secs.
Answering using voice commands
If Auto-Answer is turned off, you can use a voice
command to answer an incoming call using the
installed hands-free car kit.
• Select
Menu → Settings → Accessories →
Auto-Answer → Disabled.
To activate the Voice Answer setting:
1. Select Menu → Settings →
Voice Features → Voice Answer.
2. Highlight Enabled and press .
3. Select Menu → Settings → Silent Mode →
Normal Sounds, then press .
To answer a call:
When you receive an incoming call, the phone
responds: “Incoming call, answer?” or “Incoming
roam call, answer?” If the caller is recognized as a
contact entry in your phone, then the phone will
say “Incoming call from (Name), answer?”
• Say “
Yes” or press any key except .
82-N8735-1.book Page 69 Thursday, October 27, 2005 12:37 PM